MOTOKIYAS.

Motorcycles › Compare

Harley-Davidson Breakout vs Yamaha R7

ESTIMATED SIMULATION

Run the comparison →

The Harley-Davidson Breakout (2025) and the Yamaha R7 (2026) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The Harley-Davidson Breakout is a cruiser with 1,923 cc, 103.3 hp and 309 kg; the Yamaha R7 is a sport bike with 689 cc, 72.4 hp and 189 kg. Power-to-weight with the rider: 268.9 hp/ton versus 274.3 hp/ton. On this measure the Yamaha R7 is 2% ahead.

In the simulation the Harley-Davidson Breakout covers 0-100 km/h (speedometer) in 3.50 s and the Yamaha R7 in 3.41 s; the Yamaha R7 is quicker by 0.09 s. In the 100-0 km/h brake test, braking distance without the 0.3 s reaction time is 49.1 m for the Harley-Davidson Breakout (ABS unknown, class assumption: no ABS) and 40.0 m for the Yamaha R7 (ABS unknown, class assumption: no ABS). The Yamaha R7 stops 9.1 m shorter. Calculated top speed: 202 km/h (estimated from power and drag) versus 202 km/h (manufacturer claim).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses class-average calibration (no accepted model-specific road test) for the Harley-Davidson Breakout and model-specific parameters calibrated against published road tests for the Yamaha R7. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationHarley-Davidson BreakoutYamaha R7
Classcruisersport bike
Engine1,923 cc689 cc
Power103.3 hp72.4 hp
Wet weight309 kg189 kg
Power-to-weight (75 kg rider)268.9 hp/ton274.3 hp/ton
0-100 km/h (speedometer)3.50 s3.41 s
100-0 km/h braking distance49.1 m40.0 m
Top speed (calc.)202 km/h202 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons