MOTOKIYAS.

Motorcycles › Compare

Harley-Davidson Low Rider S vs Honda NX500

ESTIMATED SIMULATION

Run the comparison →

The Harley-Davidson Low Rider S (2025) and the Honda NX500 (2025) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The Harley-Davidson Low Rider S is a cruiser with 1,923 cc, 114.0 hp and 304 kg; the Honda NX500 is a adventure bike with 471 cc, 46.9 hp and 196 kg. Power-to-weight with the rider: 300.8 hp/ton versus 173.2 hp/ton. On this measure the Harley-Davidson Low Rider S is 74% ahead.

In the simulation the Harley-Davidson Low Rider S covers 0-100 km/h (speedometer) in 3.69 s and the Honda NX500 in 5.11 s; the Harley-Davidson Low Rider S is quicker by 1.42 s. In the 100-0 km/h brake test, braking distance without the 0.3 s reaction time is 49.1 m for the Harley-Davidson Low Rider S (ABS unknown, class assumption: no ABS) and 41.4 m for the Honda NX500 (with ABS). The Honda NX500 stops 7.7 m shorter. Calculated top speed: 208 km/h (estimated from power and drag) versus 152 km/h (estimated from power and drag).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses class-average calibration (no accepted model-specific road test) for both. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationHarley-Davidson Low Rider SHonda NX500
Classcruiseradventure bike
Engine1,923 cc471 cc
Power114.0 hp46.9 hp
Wet weight304 kg196 kg
Power-to-weight (75 kg rider)300.8 hp/ton173.2 hp/ton
0-100 km/h (speedometer)3.69 s5.11 s
100-0 km/h braking distance49.1 m41.4 m
Top speed (calc.)208 km/h152 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons