MOTOKIYAS.

Motorcycles › Compare

Honda Dio 110 vs Yamaha PG-1

ESTIMATED SIMULATION

Run the comparison →

The Honda Dio 110 (2025) and the Yamaha PG-1 (2025) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The Honda Dio 110 is a scooter with 109 cc, 8.6 hp and 96 kg; the Yamaha PG-1 is a cub / underbone with 114 cc, unlisted power and 109 kg. Power-to-weight with the rider: 50.2 hp/ton versus no data.

0-100 km/h (speedometer): Honda Dio 110 not reached (top simulated speed 68 km/h), Yamaha PG-1 29.82 s. In the 60-0 km/h brake test, braking distance without the 0.3 s reaction time is 17.9 m for the Honda Dio 110 (ABS unknown, class assumption: no ABS) and 16.9 m for the Yamaha PG-1 (with ABS). The Yamaha PG-1 stops 1.0 m shorter. The standard 60-0 test is used because one calculated top speed is below 110 km/h. Calculated top speed: 84 km/h (manufacturer claim) versus 93 km/h (estimated from power and drag).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses model-specific parameters calibrated against published road tests for the Honda Dio 110 and class-average calibration (no accepted model-specific road test) for the Yamaha PG-1. Missing manufacturer data (power, torque) is estimated by class regression, not measured. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationHonda Dio 110Yamaha PG-1
Classscootercub / underbone
Engine109 cc114 cc
Power8.6 hpno data
Wet weight96 kg109 kg
Power-to-weight (75 kg rider)50.2 hp/tonno data
0-100 km/h (speedometer)not reached (top simulated speed 68 km/h)29.82 s
60-0 km/h braking distance17.9 m16.9 m
Top speed (calc.)84 km/h93 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons