MOTOKIYAS.

Motorcycles › Compare

Honda SH125i vs Kawasaki Eliminator 500

ESTIMATED SIMULATION

Run the comparison →

The Honda SH125i (2025) and the Kawasaki Eliminator 500 (2026) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The Honda SH125i is a scooter with 125 cc, 12.9 hp and 138 kg; the Kawasaki Eliminator 500 is a cruiser with 451 cc, 44.8 hp and 176 kg. Power-to-weight with the rider: 60.4 hp/ton versus 178.4 hp/ton. On this measure the Kawasaki Eliminator 500 is 195% ahead.

In the simulation the Honda SH125i covers 0-100 km/h (speedometer) in 19.13 s and the Kawasaki Eliminator 500 in 4.66 s; the Kawasaki Eliminator 500 is quicker by 14.47 s. In the 60-0 km/h brake test, braking distance without the 0.3 s reaction time is 16.3 m for the Honda SH125i (with ABS) and 16.1 m for the Kawasaki Eliminator 500 (with ABS). The Kawasaki Eliminator 500 stops 0.2 m shorter. The standard 60-0 test is used because one calculated top speed is below 110 km/h. Calculated top speed: 97 km/h (manufacturer claim) versus 163 km/h (manufacturer claim).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses model-specific parameters calibrated against published road tests for both. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationHonda SH125iKawasaki Eliminator 500
Classscootercruiser
Engine125 cc451 cc
Power12.9 hp44.8 hp
Wet weight138 kg176 kg
Power-to-weight (75 kg rider)60.4 hp/ton178.4 hp/ton
0-100 km/h (speedometer)19.13 s4.66 s
60-0 km/h braking distance16.3 m16.1 m
Top speed (calc.)97 km/h163 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons