MOTOKIYAS.

Motorcycles › Compare

BMW R 1300 GS vs CFMoto 250SR

ESTIMATED SIMULATION

Run the comparison →

The BMW R 1300 GS (2024) and the CFMoto 250SR (2026) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The BMW R 1300 GS is a adventure bike with 1,300 cc, 143.5 hp and 237 kg; the CFMoto 250SR is a sport bike with 249 cc, 26.2 hp and unlisted weight. Power-to-weight with the rider: 459.9 hp/ton versus 105.1 hp/ton. On this measure the BMW R 1300 GS is 338% ahead.

In the simulation the BMW R 1300 GS covers 0-100 km/h (speedometer) in 2.96 s and the CFMoto 250SR in 8.38 s; the BMW R 1300 GS is quicker by 5.42 s. In the 100-0 km/h brake test, braking distance without the 0.3 s reaction time is 41.4 m for the BMW R 1300 GS (with ABS) and 36.4 m for the CFMoto 250SR (with ABS). The CFMoto 250SR stops 5.0 m shorter. Calculated top speed: 225 km/h (manufacturer claim) versus 142 km/h (estimated from power and drag).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses model-specific parameters calibrated against published road tests for both. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationBMW R 1300 GSCFMoto 250SR
Classadventure bikesport bike
Engine1,300 cc249 cc
Power143.5 hp26.2 hp
Wet weight237 kgno data
Power-to-weight (75 kg rider)459.9 hp/ton105.1 hp/ton
0-100 km/h (speedometer)2.96 s8.38 s
100-0 km/h braking distance41.4 m36.4 m
Top speed (calc.)225 km/h142 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons