MOTOKIYAS.

Motorcycles › Compare

Kawasaki Eliminator 500 vs Yamaha R7

ESTIMATED SIMULATION

Run the comparison →

The Kawasaki Eliminator 500 (2026) and the Yamaha R7 (2026) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The Kawasaki Eliminator 500 is a cruiser with 451 cc, 44.8 hp and 176 kg; the Yamaha R7 is a sport bike with 689 cc, 72.4 hp and 189 kg. Power-to-weight with the rider: 178.4 hp/ton versus 274.3 hp/ton. On this measure the Yamaha R7 is 54% ahead.

In the simulation the Kawasaki Eliminator 500 covers 0-100 km/h (speedometer) in 4.66 s and the Yamaha R7 in 3.41 s; the Yamaha R7 is quicker by 1.26 s. In the 100-0 km/h brake test, braking distance without the 0.3 s reaction time is 44.7 m for the Kawasaki Eliminator 500 (with ABS) and 40.0 m for the Yamaha R7 (ABS unknown, class assumption: no ABS). The Yamaha R7 stops 4.7 m shorter. Calculated top speed: 163 km/h (manufacturer claim) versus 202 km/h (manufacturer claim).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses model-specific parameters calibrated against published road tests for both. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationKawasaki Eliminator 500Yamaha R7
Classcruisersport bike
Engine451 cc689 cc
Power44.8 hp72.4 hp
Wet weight176 kg189 kg
Power-to-weight (75 kg rider)178.4 hp/ton274.3 hp/ton
0-100 km/h (speedometer)4.66 s3.41 s
100-0 km/h braking distance44.7 m40.0 m
Top speed (calc.)163 km/h202 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons