MOTOKIYAS.

Motorcycles › Compare

KTM 390 Duke vs Yamaha Sirius FI

ESTIMATED SIMULATION

Run the comparison →

The KTM 390 Duke (2025) and the Yamaha Sirius FI (2025) are compared with the same Moto Kıyas physics model under identical conditions: flat dry asphalt, no wind, a 75 kg rider and no passenger. The KTM 390 Duke is a naked bike with 399 cc, 44.4 hp and 165 kg; the Yamaha Sirius FI is a cub / underbone with 114 cc, 8.6 hp and 98 kg. Power-to-weight with the rider: 184.9 hp/ton versus 49.6 hp/ton. On this measure the KTM 390 Duke is 273% ahead.

0-100 km/h (speedometer): KTM 390 Duke 5.48 s, Yamaha Sirius FI not reached (top simulated speed 89 km/h). In the 60-0 km/h brake test, braking distance without the 0.3 s reaction time is 15.7 m for the KTM 390 Duke (with ABS) and 18.5 m for the Yamaha Sirius FI (ABS unknown, class assumption: no ABS). The KTM 390 Duke stops 2.8 m shorter. The standard 60-0 test is used because one calculated top speed is below 110 km/h. Calculated top speed: 167 km/h (test measurement) versus 88 km/h (estimated from power and drag).

All values are an estimated simulation, not road-test measurements. Technical data comes from the sources listed below; the model uses model-specific parameters calibrated against published road tests for the KTM 390 Duke and class-average calibration (no accepted model-specific road test) for the Yamaha Sirius FI. Open the interactive app (currently in Turkish) to watch the run side by side and change the load.

Estimated simulationKTM 390 DukeYamaha Sirius FI
Classnaked bikecub / underbone
Engine399 cc114 cc
Power44.4 hp8.6 hp
Wet weight165 kg98 kg
Power-to-weight (75 kg rider)184.9 hp/ton49.6 hp/ton
0-100 km/h (speedometer)5.48 snot reached (top simulated speed 89 km/h)
60-0 km/h braking distance15.7 m18.5 m
Top speed (calc.)167 km/h88 km/h

Data sources and calibration

Specifications: the sources below (manufacturer pages, plus road-test or spec sites where the manufacturer gives no figure). Acceleration, braking and top speed: Moto Kıyas physics simulation (power/torque curve, gearing, drag, traction and wheelie limits, ABS assumption), calibrated against published road tests where available. Estimated, not measured.

More comparisons